The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FingerTight · 11-30-2007, 07:04 PM

Hey guys, looking to put a camper in the back of my truck. To do it right I would need to put a 3/4 ton rear axle and some HD springs, yea? Anything else? Can I get away with my stock drums? (not planning on towing much more than a ski boat) I have a leaf rear end, so my hope is that I can get away with an axle / spring swap relatively inexpensive. Suggestions on axles appreciated (Corp. 14 bolt / Dana 60 are what I have turned up so far). Are there any differences between the Dana's that came under the backs of Fords vs. Chevys?

Thanks!

11-30-2007, 07:04 PM	#1
FingerTight So there I was... Join Date: Aug 2007 Location: Malibu, CA Posts: 81	Camper on a 1/2 ton LWB Hey guys, looking to put a camper in the back of my truck. To do it right I would need to put a 3/4 ton rear axle and some HD springs, yea? Anything else? Can I get away with my stock drums? (not planning on towing much more than a ski boat) I have a leaf rear end, so my hope is that I can get away with an axle / spring swap relatively inexpensive. Suggestions on axles appreciated (Corp. 14 bolt / Dana 60 are what I have turned up so far). Are there any differences between the Dana's that came under the backs of Fords vs. Chevys? Thanks! __________________ - Rick 1969 C10 LWB, leafs, 350/700R4, 2003 Yukon Denali Last edited by FingerTight; 11-30-2007 at 07:06 PM.