The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - lower springs

70c10 · 12-02-2007, 07:15 AM

I recently cut a pair of front springs and the driver side sits a little lower. When I get in it's even more noticeable due to my weight. I bought a set of coil spring spacers that twist into the coils and plan to raise the driver side almost a half inch to make it level while I'm driving. I'm picky about the stance and the spacers were only $5 at the local parts store and look like this. Pickmup's way is the best but I'm too lazy and figure these are worth a try.
http://sports-imports.stores.yahoo.net/twinspbo.html

12-02-2007, 07:15 AM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: lower springs - not even I recently cut a pair of front springs and the driver side sits a little lower. When I get in it's even more noticeable due to my weight. I bought a set of coil spring spacers that twist into the coils and plan to raise the driver side almost a half inch to make it level while I'm driving. I'm picky about the stance and the spacers were only $5 at the local parts store and look like this. Pickmup's way is the best but I'm too lazy and figure these are worth a try. http://sports-imports.stores.yahoo.net/twinspbo.html __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 12-02-2007 at 07:27 AM.