The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

b1v3r · 12-17-2007, 10:51 PM

85 scottsdale> When I turn on headlights, i get the High beam indicator as well as both turn indicator lights on my dash. None of the dash lights work except the ONE bulb by the heater control valve. I replaced the screw holding the board with the flasher on it and that fixed it for a short while, but now it is back > ALl exterior lights work and turn indicators do as well. This truck has no interior light and is an old department of transportation truck that only has 68,000 original miles. Yes Original. It was only used on the complex to run parts. It runs great. but it is basic of the basics. Thanx.

12-17-2007, 10:51 PM	#1
b1v3r Registered User Join Date: Aug 2007 Location: Austin, Texas Posts: 11	Lighting problem 85 scottsdale> When I turn on headlights, i get the High beam indicator as well as both turn indicator lights on my dash. None of the dash lights work except the ONE bulb by the heater control valve. I replaced the screw holding the board with the flasher on it and that fixed it for a short while, but now it is back > ALl exterior lights work and turn indicators do as well. This truck has no interior light and is an old department of transportation truck that only has 68,000 original miles. Yes Original. It was only used on the complex to run parts. It runs great. but it is basic of the basics. Thanx.