|
Re: 6 cyl. Auto changeover
On your 67, you will need to replace the slipyolk & shorten the front D shaft to do the swap. I agree with using the short (6" tail" 350 T), & thats a direct swap on the later trucks with the saginaw trans(7 bolt side cover). Your shortie 3 spd is a Muncie(iD by 4 bolt side cover). You can also use a D shaft from a 69-72, 6 cyl 3 spd truck that has the same wheel base as your truck. Best of luck,crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|