The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72 cheyenne pdx · 12-21-2007, 01:16 PM

Sorry for the delay in your request.
I use Phoenix Gold power/ground wire.

I forgot to say that you will also need a remote turn wire for the amp(s) as well in my first post, but you probably already knew that.

You can put tweets on an amp, but if you do that, you will need a x-over to filter out the lower frequencies. A new alternator would help, but may not be neccessary. I don't know what yours is outputting. You can also put a 1 farad capacitor inline with the power wire. That will help.

Good Luck

12-21-2007, 01:16 PM	#7
72 cheyenne pdx Registered User Join Date: Nov 2006 Location: Portland Posts: 382	Re: Amp hook up kits Sorry for the delay in your request. I use Phoenix Gold power/ground wire. I forgot to say that you will also need a remote turn wire for the amp(s) as well in my first post, but you probably already knew that. You can put tweets on an amp, but if you do that, you will need a x-over to filter out the lower frequencies. A new alternator would help, but may not be neccessary. I don't know what yours is outputting. You can also put a 1 farad capacitor inline with the power wire. That will help. Good Luck Last edited by 72 cheyenne pdx; 12-21-2007 at 01:18 PM.