No, and you can't put a shifter knob on that has a 5th gear painted on and expect to have 5 gears :-) (reality check)
The Manual box is smaller. I would go to a junkyard and get the whole setup. Pump, bracket, Hoses, Steering box, pitman, and you will probably need the rubber flex disc or rag joint that goes between the box and the steering shaft as the one on a power system is bigger.
Good Luck
__________________
Scrub
Sisters, Oregon - Home of the Sisters Rodeo.
70 GMC 1,000,000 + miles
72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.
|