Re: Wiring in 2 relays to the headlight's
VetteVet,
I may do the other side today. I don't feel like I have to but I may do it anyway. I have the wire already. The only thing is I would have to reduce back down to the orignal size wire or use spade connectors on the light's which I really don't want to do. What did you guy's do about the light connector when using heavier wire? I've been thinking of doing the parking light's and driving lights off of relay's to since I tied the fog lamps into the parking circuit.
airdale94,
The relays were out on the shelf at the store. They were where the fog light kit's are.Both relays have two terminals for the accessaries to hook to so running the other wires wouldn't be a problem I don't think. Part # DF005 good up to 30amp's
Longhorn Man,
I don't think water will be a problem either on them except when I wash it.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|