The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

meathead95 · 12-26-2007, 10:07 AM

ok i got it apart and the big o ring on the trans side looks good as well as the 2 seals inside that ride on the sleeve. i didnt see any cracks in it either. but both seals where stiff so i removed them anyway and the sleeve does have a groove on it but not big enough to catch a fingernail so is it good or bad? the groove is on the transfer case side. how can i pressure wash this without getting water in the case or will it hurt if i do?

12-26-2007, 10:07 AM	#12
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: th350/np205 help ok i got it apart and the big o ring on the trans side looks good as well as the 2 seals inside that ride on the sleeve. i didnt see any cracks in it either. but both seals where stiff so i removed them anyway and the sleeve does have a groove on it but not big enough to catch a fingernail so is it good or bad? the groove is on the transfer case side. how can i pressure wash this without getting water in the case or will it hurt if i do? __________________ 72 2wd blazer 72 swb 4x4 Last edited by meathead95; 12-26-2007 at 10:09 AM.