|
Re: Wiring in 2 relays to the headlight's
Quote:
Originally Posted by Andy4639
VetteVet,
[B]I may do the other side today. I don't feel like I have to but I may do it anyway. I have the wire already. The only thing is I would have to reduce back down to the orignal size wire or use spade connectors on the light's which I really don't want to do. What did you guy's do about the light connector when using heavier wire? I've been thinking of doing the parking light's and driving lights off of relay's to since I tied the fog lamps into the parking circuit.
airdale94,
The relays were out on the shelf at the store. They were where the fog light kit's are.Both relays have two terminals for the accessaries to hook to so running the other wires wouldn't be a problem I don't think. Part # DF005 good up to 30amp's
Longhorn Man,
I don't think water will be a problem either on them except when I wash it.[/B]
|
Going back and reviewing the schematics and other references, I realized that the heavier wires are needed just to feed the relays. I think you would be fine with the OEM harness from the relays to the lights. It certainly wouldn't hurt to run heavier wires but like you said you would have to rebuild the connectors at the lights.
__________________
VetteVet
metallic green 67 stepside
74 corvette convertible
1965 Harley sportster
1995 Harley wide glide
Growing old is hell, but it beats the alternative.
|