The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*67Fleetsidedream* · 01-12-2003, 04:34 PM

Let me see if I am getting this right. So I can buy a 11in pressure plate and clutch and it will bolt to a 168t/12in truck flywheel?
All I am wanting to do is convert my clutch from a 10 spline to a 26 spline. I was thinking that I would need to get a 11in flywheel, 11in clutch and a 11in pressure plate to make this conversion. Do I have it all wrong?

Thanks again
Ben

01-12-2003, 04:34 PM	#3
67Fleetsidedream Wiseass secured himself a BAN Join Date: Nov 2000 Location: MOON!!! Posts: 2,282	Let me see if I am getting this right. So I can buy a 11in pressure plate and clutch and it will bolt to a 168t/12in truck flywheel? All I am wanting to do is convert my clutch from a 10 spline to a 26 spline. I was thinking that I would need to get a 11in flywheel, 11in clutch and a 11in pressure plate to make this conversion. Do I have it all wrong? Thanks again Ben