[abadsvt]

Thanks everyone for the help! I am making my own motor mounts since i have a tube frame that i built. The biggest problem i have is i needed to make sure the rear end off the c5 is centered in height and depth with the rear wheels. So since that was the most important part and the torque tube sits level it kind of dictates how high the motor is going to sit. Which is slightly lower than stock. I was hoping to see if i can look at the camaro oil pan in person and see how it is going to sit and look. The other thing is i have to lower the front round rails because i don't have enough clearance for the rack (actually i do but it is very close) so i might be able to make the corvette pan work but if not then i am definately going with the camaro pan. Do any of you see a problem with the slightly smaller quart capacity of the camaro pan? It is a 5-5.5qt vrs the corvette which is 6-6.5 qt.

Thanks Josh