|
Re: Question RE: core supprt mount bolts
The original bolts are 7/16-14 x 3 carriage head bolts that fit into 1/8" plates which were 1 1/4" square approximately to hold them in place.
On the trucks that we have restored, we reuse the plates and get the carriage head bolts from the local Tractor Supply store. Most hardware stores will have the carriage head bolts.
Since you have the bushings, I would suggest measuring the stackup and getting the right length bolts locally.
If you don't have the plates, they can easily be made by filing the square hole after first drilling a round hole 3/8" in diameter.
Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end
1965 Impala SS 400 sbc, Muncie rock crusher
1966 Impala SS 396 bbc, TH 400
1969 El Camino, 350 sbc, TH 350
1971 Snowplow built on a Blazer frame
1972 GMC Short bed, stepside, TH 400, 427 BBC
|