|
Re: Truck leaning to the right - 1 -1 1/2"
Alex: Measure from front bumper\frame interface to ground on both sides front and rear. On a flat floor all should be within 1\2" of each other. Shocks don't have anything to do with riding height UNLESS they are gas charged. If you have gas charged shocks take them out and re measure. If ground to frame measurements are bad it's suspension or bent frame. If frame to ground measurements are good, it's a body mounting problem.jim
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot  Jim or Paladin whichever you choose.
|