[copperchevy]

I welded a nut to the rod and used small crimps to attach the cable at both the rod and the solenoid. I lost the crimps that came with my kit, so i got some from lowes. The sliding door glass pulley which i also got from lowes bolts up to the factory bottom hole of the inside handle after taking that bolt out. There was alot of play in the door handle so i shortened the rod to make it a bit stiffer. In doing so, it makes it easier on the solenoid to pull the latch open. Take it from me, cable tension is the key. If its too tight or too loose the solenoid is'nt going to pull the latch/door open.