|
Re: Heater controls bolt to hold it in place
Mine have 2 sheet metal screws that are about a #12 X 1", don't know if that's correct or not. If the holes are oversize now, just use machine screws and nuts.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.   
|