The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

larry may · 01-31-2008, 01:58 AM

Look at the lable glued to the glove box door. Rear ration may be there if the label is still intact. Otherwise remove the rear cover. count the pinion gear teeth and the ring gear teeth. Divide the lesser number in to the larger number . should get you the ratio of your gears. Clean up the mating surfaces apply a bead of rtv. and put the cover back on. If this is a posi trac add a bottle of positrac lube along with the 80/90 weight, Am sure one of the wizzards here will chime in and letcha know what I forgot. Have fun........

01-31-2008, 01:58 AM	#2
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: Rebuild Differential? Look at the lable glued to the glove box door. Rear ration may be there if the label is still intact. Otherwise remove the rear cover. count the pinion gear teeth and the ring gear teeth. Divide the lesser number in to the larger number . should get you the ratio of your gears. Clean up the mating surfaces apply a bead of rtv. and put the cover back on. If this is a posi trac add a bottle of positrac lube along with the 80/90 weight, Am sure one of the wizzards here will chime in and letcha know what I forgot. Have fun........ __________________ The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2 Last edited by larry may; 01-31-2008 at 01:59 AM.