The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

D-Day · 02-01-2008, 07:30 AM

Yes, you want to "push" rather than "pull". My dual tanks have the tank solenoid/switch close to the tank, and has the two lines (one from each tank) connected to the solenoid which outputs to one (I assume yours is like this too), and I have the electric pump mounted as close as I can in front of this using the output line.

My fuel line and fuel pump are mounted inside the frame rail.

02-01-2008, 07:30 AM	#2
D-Day Live fast, die young Join Date: Sep 2006 Location: Northwest Ohio Posts: 293	Re: Electric Fuel Pump W/dual Tanks Yes, you want to "push" rather than "pull". My dual tanks have the tank solenoid/switch close to the tank, and has the two lines (one from each tank) connected to the solenoid which outputs to one (I assume yours is like this too), and I have the electric pump mounted as close as I can in front of this using the output line. My fuel line and fuel pump are mounted inside the frame rail. Last edited by D-Day; 02-01-2008 at 07:30 AM.