|
Re: mono leafs under the rear of my c10
Yes this was mock-up, no welds on the brackets and about 8 degrees off on the pinion angle..
The 60 started out as a full floater ford truck rear 77 vintage I think, I had it shortened 2 inches from my stock 12bolt, and had big ford bearing ends put on. I am running 35 spline Dutchman's with a 3.73 and Power Loc. I am using 74 Lincoln rear disc brakes w/ 11in rotors and a 5on5 bolt pattern.
Next to locate will be the shock mounts, then finalize it all and weld it in.
__________________
Trippin Hazard.. 67 swb,
Gold Member.. 68 Suburban
Air Force Retired
|