The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LMN8UR · 02-15-2008, 10:28 AM

I have an Edelbrock auto choke. There is no adjustment to make it act quicker. But you can adjust how much it closes by loosening the three screws and rotating the assembly. With the engine off and cold, remove your air cleaner and watch the choke flapper as you rotate.

If it doesn't seem to be acting quickly enough, check your electrical connections, you may not be getting the full 12 volts.

02-15-2008, 10:28 AM	#2
LMN8UR Registered User Join Date: Jun 2005 Location: Midlothian, VA Posts: 148	Re: electric choke I have an Edelbrock auto choke. There is no adjustment to make it act quicker. But you can adjust how much it closes by loosening the three screws and rotating the assembly. With the engine off and cold, remove your air cleaner and watch the choke flapper as you rotate. If it doesn't seem to be acting quickly enough, check your electrical connections, you may not be getting the full 12 volts. __________________ 72 Chevy C-10 Custom LWB 383 Stroker - Edlebrock Air Gap intake and 670 CFM Holley Street Avenger carb. Hooker Comp Headers w/ X-Pipe and 2.25 duals TKO-500 & 3.08:1 rear I Love HEMI's, they're soft & chewy!