The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Do you need '64-'66 Chevy Truck Parts?

ron19 · 02-15-2008, 10:39 AM

Hey LILRED,

Would you like to sell a main harness out of one of those trucks? After reviewing the wiring in my truck, all I need is the small connector that goes through the firewall to the drive side of the trans tunnel. It only has 3 or 4 wires on it. The other part would be the ignition switch connector, it has about 5 or 6 wires on it. I wouldn't be afraid to splice the connectors to the existing wires, could do that pretty safely. I hate to buy a whole replacement harness for $450+ for just these two parts.

Let me know,

02-15-2008, 10:39 AM	#16
ron19 Registered User Join Date: Jan 2007 Location: Indiana Posts: 107	Re: Do you need '64-'66 Chevy Truck Parts? Hey LILRED, Would you like to sell a main harness out of one of those trucks? After reviewing the wiring in my truck, all I need is the small connector that goes through the firewall to the drive side of the trans tunnel. It only has 3 or 4 wires on it. The other part would be the ignition switch connector, it has about 5 or 6 wires on it. I wouldn't be afraid to splice the connectors to the existing wires, could do that pretty safely. I hate to buy a whole replacement harness for $450+ for just these two parts. Let me know, __________________ 65' Chevy C10, Short Step 75' Chevy Big10 1/2, 1 time pull truck, now parts truck 02' GMC 2500HD 8.1L 4X4