The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

killer_mike · 02-16-2008, 01:52 PM

Ok, im not into getting complicated with power steering, i bought 2 pumps at the junk yard, for nothing, they dont fit, i dont want to drill the frame nor welding and cutting stuff with a torch, besides the fact i dont have equipment for this, so that being said...

Would i be able to slap a steering from a 1953-1966 into my truck WITHOUT mods?
I bought almost everything for p/s but for my luck, it dont fit, so f... it, manual steering it is, the simpler the better; i jsut got a Dana 44 open knuckle so at least i get disk brakes. Since i bought the truck its been sitting on the garage in jack stands just because the former owner is a trucktard, he drove the thing with a broken-almost-torn-in-half steering box...

Thanks.

02-16-2008, 01:52 PM	#1
killer_mike Big Red & Mister Blue... Join Date: Jan 2008 Location: Pat, NJ Posts: 107	K10 1967 steering gear Ok, im not into getting complicated with power steering, i bought 2 pumps at the junk yard, for nothing, they dont fit, i dont want to drill the frame nor welding and cutting stuff with a torch, besides the fact i dont have equipment for this, so that being said... Would i be able to slap a steering from a 1953-1966 into my truck WITHOUT mods? I bought almost everything for p/s but for my luck, it dont fit, so f... it, manual steering it is, the simpler the better; i jsut got a Dana 44 open knuckle so at least i get disk brakes. Since i bought the truck its been sitting on the garage in jack stands just because the former owner is a trucktard, he drove the thing with a broken-almost-torn-in-half steering box... Thanks.