The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 9-inch Fab

**68bowtie** · 02-18-2008, 03:26 AM

I'm welding new perches onto a 9-inch to bolt into my 68 sb c10 with trailing arms. I've got everything ready to weld in place, but I want to double check the stock perch distance from center to center. Can't seem to find a reference. Thought maybe someone could crawl under theirs and measure what they have on a stock rearend.

I'd appreciate the help.

02-18-2008, 03:26 AM	#1
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,825	9-inch Fab - need perch distance I'm welding new perches onto a 9-inch to bolt into my 68 sb c10 with trailing arms. I've got everything ready to weld in place, but I want to double check the stock perch distance from center to center. Can't seem to find a reference. Thought maybe someone could crawl under theirs and measure what they have on a stock rearend. I'd appreciate the help.