Re: Only Corn is in the elec section so here goes.
That's what I was thinking - I don't have the TCS stuff hooked up (leaving it that way) - I've been redoing my harnesses and eliminating stuff that just isn't used. I need to get the temp part figured out the way it was though so I can then do the switching around for the guage dash. I don't want to fry it the first time out... I just can't seem to find a schematic for the 6 cylinder - The other part I really need is to figure out what wiring is supposed to be hooked to the two pots on the carb. I believe the TCS controlled the idle adjustment pot so I can leave that out. That leaves one other one....
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer"
(you don't always have to state the obvious)
Wear your PPE! You can eat with false teeth but you can't see with a false eye.
1959 Studebaker Silverhawk 350/400
1972 C10 L6 3OTT
2005 F350 - Built - whew!
|