[ckhd]

I guess one thing that thread didn't really address is the motor mounts. I moved the crossmemeber that the mounts are on forward. I had to drill new holes to mount the crossmember in. Not a big deal, but it's 8 new holes in the frame. Measure at least twice, so you only have to drill once. I have 10 new holes in my frame!

Oh, and I did have to trim my fan shroud a touch for the power steering pump and for the harmonic balancer. Not much, just a couple little notches, and it was easy to do.

If you have any more questions or specific questions, ask. I might not see this thread again (I don't come by as much as I used to), so if you ask me something and I don't reply, PM me and I'll come back and find the thread.