The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OldCreek · 02-27-2008, 08:52 AM

Need a verification on ubolt size for H052 axle.

I'm measuring 3.30" diameter. (I've found some of these made by Rancho.)

I've some 3.375" (3 3/8" ) in my possession.... can I use these? Or, does the tolerance need to be exact. I've plates that would fit 3 3/8... probably fit the 3.30" also.

Also, can someone verify the 4th Ubolt on the passenger side of a D60 needs to be 4". The other 2 I have are 3 1/8" for the driver side.

Thanks

02-27-2008, 08:52 AM	#1
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,029	ubolt size Need a verification on ubolt size for H052 axle. I'm measuring 3.30" diameter. (I've found some of these made by Rancho.) I've some 3.375" (3 3/8" ) in my possession.... can I use these? Or, does the tolerance need to be exact. I've plates that would fit 3 3/8... probably fit the 3.30" also. Also, can someone verify the 4th Ubolt on the passenger side of a D60 needs to be 4". The other 2 I have are 3 1/8" for the driver side. Thanks __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263