[69 longhorn]

Other than brackets for brake hoses,I dont think you will find any differences in the 71-72 crossmember vs the 67. I didnt feel the need to replace the crossmember on the 69,just used the 71-72 lower a arms,& the rest of the pcs are 75 C10,including the brake lines,hoses,prop valve & master. The front brake hoses route through the frame& are also bolted to the top a arms (I had to drill a hole on ea side),& the prop valve is mounted on the back side of the front crossmember........no need to worry about missing brackets on my 69 crossmember. there are many ways to do the job,& a lot depends on what parts you can find at a reasonable price.Good luck.......69

[This message has been edited by 69 longhorn (edited May 19, 2002).]