The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**truckster** · 02-28-2008, 08:27 AM

That doesn't mean you couldn't do it if you really want to. There are a couple of options for the glass: 1. Have the glass cut from laminated safety glass. The window won't be as resistant to breakage. 2. Make a pattern or have your glass shop make a pattern and send it out to get a piece of tempered glass made.

I'm looking at doing tempered 35% gray glass for my top, and the side windows will run me about $60 each through my local glass shop.

Then you'd have to fabricate the glass run channel. There are several people on the 67-72 truck message board that have done it. You could do a search and figure it out.

02-28-2008, 08:27 AM	#3
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 8,030	Re: One Piece Windows??? That doesn't mean you couldn't do it if you really want to. There are a couple of options for the glass: 1. Have the glass cut from laminated safety glass. The window won't be as resistant to breakage. 2. Make a pattern or have your glass shop make a pattern and send it out to get a piece of tempered glass made. I'm looking at doing tempered 35% gray glass for my top, and the side windows will run me about $60 each through my local glass shop. Then you'd have to fabricate the glass run channel. There are several people on the 67-72 truck message board that have done it. You could do a search and figure it out.