|
The way my larger amp is installed its kinda floating under the seat. When the seat is out of the truck. There is a drop in the floor, pretty much right under the driver, and right under the passenger. The amps you have should be able to have 3 corners on the higher part of the drop and the center of the amp will be high enough from the bottom of the drop that you can slide your hand under it. The forth corner will probly float. But with 3 screws in the amp, its not going anywhere. Seems to be great for cooling too. It gets hot here in the summer and some of my friends with amps under the seat have heat problems. I havent had any. To mount the amps the way I describe you will have to remove the seat. You should be able to figure out what Im talking about and see if it works. It doesnt take very long to take out the seat.
If you have some good size speakers and they are slapping around alot behind your seat they can make a noise on the back of the seat. Putting grilles on the boxes helps. I had a couple towels over the speakers for awhile and it helped alot. The new Q-Logic boxes I have (not yet installed), have a little guard that works pretty well too.
|