[67lngbed]

I sort of pieced a kit together my self. I F@#%ed up the first time and got the wrong spindles ld 1" rotors. I was pissed when I got the rotors from cpp and the bearings were different. But what I did was get the spindles, calipers, prop valve, booster, mc, and complete steering assembly(box to tierods) from an 8x hd 1.25" rotor truck. Used the calipers for cores on new ones. made all new hard brake lines fro the front. New flex lines, And new balljoints for the 8x truck In my 67 arms. The only triming was to the steering stops on the spindles. Power discs (drilled and sloted rotors) and better steering for around 400.

good luck