The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Dooley · 03-07-2008, 10:55 AM

The hydraulic cam I have in my plow truck has served me well.

intake and exhaust are .4425
intake and exhaust duration is 288@50
Overlap 64
Lobe centers 107
intake opens BTDC 0
intake closes at ABDC 34
exhaust opens BBDC 44
exhaust closes ATDC 10

Wolverine brand. I don't think they grind'em like that much anymore!
Stump pulling power.
Running 9.5 flat top pistons, bored 30 over, stock heads with 3 angle cut.
Rocker arm ratio 1.5:1

Nice lope, especially when cold!

03-07-2008, 10:55 AM	#8
Dooley Registered User Join Date: Mar 2005 Location: North Coast Posts: 1,012	Re: Cam question The hydraulic cam I have in my plow truck has served me well. intake and exhaust are .4425 intake and exhaust duration is 288@50 Overlap 64 Lobe centers 107 intake opens BTDC 0 intake closes at ABDC 34 exhaust opens BBDC 44 exhaust closes ATDC 10 Wolverine brand. I don't think they grind'em like that much anymore! Stump pulling power. Running 9.5 flat top pistons, bored 30 over, stock heads with 3 angle cut. Rocker arm ratio 1.5:1 Nice lope, especially when cold! Last edited by Dooley; 03-07-2008 at 11:29 AM.