The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shifty · 03-20-2008, 07:17 AM

The single quickest, cheapest drop you'd get out of it would be tossing some 2.5" drop spindles in the front, IMHO. It would even it up and have both wheels sitting in about the same place. Opposite extreme, if you want to lay frame and get down that extra 4-5", KP stepnotch and dropmember all the way. Or something in the middle, bolt-in notch, drop spindles and 2" blocks will have you in between IMO.

03-20-2008, 07:17 AM	#8
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: drop member and kp notch on 4wd frame? The single quickest, cheapest drop you'd get out of it would be tossing some 2.5" drop spindles in the front, IMHO. It would even it up and have both wheels sitting in about the same place. Opposite extreme, if you want to lay frame and get down that extra 4-5", KP stepnotch and dropmember all the way. Or something in the middle, bolt-in notch, drop spindles and 2" blocks will have you in between IMO. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.