|
Re: Ground for instrument panel?
if the guages are working, odds are your ground is fine. However, I always add a ground to mine regardless if there is an isse. if it gets removed, it gets a ground strap.
The stock one was a clip on piece, and was probably lost 20 years ago, you woulds seen it and either recognised it, or asked about it.
Just take a length of wire, put a couple eyelet crimp ons on either end, secure one side to the back of the inst panel on one of the bolts that goes into the metal... like maybe one of the ones holding the oil pressure guage in place. Then, the other end, slip it under a scres that holds the whole assembly to the dash.
|