The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BIG HEAD · 03-28-2008, 04:27 AM

go to chuckstrucks.net Chuck sells every thing you need to put springs under a 2wd. Put your 2wd on jack stands. Mark on the frame the spindle center line. Take a wheel base measurement, remove front suspension. I build all of my parts. I dont know what you can or cant do. So look at Chucks projects. It might give you some ideas. As far as the engine mount x-member art morrision sell a nice one that you weld in for 75.00. Or go to offroaddesign.com they have a bolt in high ground clearance x-member. Check out my frame. It is on page 19 of 4x4 pictures.

03-28-2008, 04:27 AM	#11
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: Change a 2wd to a 4wd go to chuckstrucks.net Chuck sells every thing you need to put springs under a 2wd. Put your 2wd on jack stands. Mark on the frame the spindle center line. Take a wheel base measurement, remove front suspension. I build all of my parts. I dont know what you can or cant do. So look at Chucks projects. It might give you some ideas. As far as the engine mount x-member art morrision sell a nice one that you weld in for 75.00. Or go to offroaddesign.com they have a bolt in high ground clearance x-member. Check out my frame. It is on page 19 of 4x4 pictures. Last edited by BIG HEAD; 03-28-2008 at 04:30 AM.