The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Nice '68 stepside,... But how original is it?

Huck · 04-01-2008, 03:38 PM

May be an original truck, just not manufactured and assembled by Chevrolet division of General Motors. Check the Vin plate verses the block numbers and the vin # stamped into the frame next to the power steering pump. There are a lot of differences between 67-68 like power steering design, dash knobs, vent window levers. You can put a 67 cab on a 68 frame pretty easy just like removing and replacing the vin tag with a 68. Still a nice truck BUT way misrepresented.

04-01-2008, 03:38 PM	#7
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: Nice '68 stepside,... But how original is it? May be an original truck, just not manufactured and assembled by Chevrolet division of General Motors. Check the Vin plate verses the block numbers and the vin # stamped into the frame next to the power steering pump. There are a lot of differences between 67-68 like power steering design, dash knobs, vent window levers. You can put a 67 cab on a 68 frame pretty easy just like removing and replacing the vin tag with a 68. Still a nice truck BUT way misrepresented. Last edited by Huck; 04-01-2008 at 03:44 PM. Reason: left out some good stuff