The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jerry moss** · 01-26-2003, 11:13 AM

all 4 of my K-20s have them. i work in a muffler shop and the tubing we use is aluminized steel. several years ago i started building those out of stainless steel tubing, just never finished any of them. they are bent but need the bead on the ends. stainless is expensive but most muffler shops should be able to get it in 7 foot lengths. if you get the tubing yourself, be careful as some is NOT bendable. it will crush if you try to bend it.

01-26-2003, 11:13 AM	#23
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,960	all 4 of my K-20s have them. i work in a muffler shop and the tubing we use is aluminized steel. several years ago i started building those out of stainless steel tubing, just never finished any of them. they are bent but need the bead on the ends. stainless is expensive but most muffler shops should be able to get it in 7 foot lengths. if you get the tubing yourself, be careful as some is NOT bendable. it will crush if you try to bend it. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA