The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Mickey_D · 04-08-2008, 02:15 PM

There should only be a couple. One for the EGR valve solenoid, one for the evaporative canister (on the rad support driver's front), and possibly one going to the temperature valve on the air cleaner. Unless you've got the vacuum controlled heater selector valves, in which case there will be one going there, too. Oh, and the one going to the MAP sensor.

I know yours is an 87, but should be similar to one of the ones on this page :
http://www.autozone.com/az/cds/en_us...rInfoPages.htm

04-08-2008, 02:15 PM	#2
Mickey_D Dirteh Kitteh Join Date: Nov 2006 Location: Mormon country Posts: 2,484	Re: TBI help There should only be a couple. One for the EGR valve solenoid, one for the evaporative canister (on the rad support driver's front), and possibly one going to the temperature valve on the air cleaner. Unless you've got the vacuum controlled heater selector valves, in which case there will be one going there, too. Oh, and the one going to the MAP sensor. I know yours is an 87, but should be similar to one of the ones on this page : http://www.autozone.com/az/cds/en_us...rInfoPages.htm __________________ Darrin 1955 Willys CJ-5 all original and the oldest CJ-5 on the road. 2001 Dodge Neon (wife's car) 1995 Jeep Grand Cherokee Limited Edition SOLD 1981 K15 Custom Deluxe 4X4, rusty but trusty wood hauler. SOLD 1993 S-10 4X4 Tahoe SOLD Sign up with the Contact List RIP ESLL Last edited by Mickey_D; 04-08-2008 at 02:15 PM.