The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ben@speedbarn · 04-09-2008, 03:03 PM

Hey guys...haven't been around here for a while. When I was rebuilding my 76 GMC I replaced the doors and bed with a set that were from an 85ish truck(not exactly sure). I saved the door glass out of the '76 doors in case I ever needed them. Well shut my drivers door yesterday and the glass shattered. I noticed online that the part numbers for the regulators and trim for the windows are different between 81/below and 82/up, but haven't found any info about the actual glass.

I've attached a picture of it almost finished just for the heck of it.

Thanks...

04-09-2008, 03:03 PM	#1
ben@speedbarn Done yet? Join Date: Jun 2005 Location: Pittsburgh Posts: 118	Will '76 door glass fit in '85 door? Hey guys...haven't been around here for a while. When I was rebuilding my 76 GMC I replaced the doors and bed with a set that were from an 85ish truck(not exactly sure). I saved the door glass out of the '76 doors in case I ever needed them. Well shut my drivers door yesterday and the glass shattered. I noticed online that the part numbers for the regulators and trim for the windows are different between 81/below and 82/up, but haven't found any info about the actual glass. I've attached a picture of it almost finished just for the heck of it. Thanks... Attached Images __________________ '76 k2500 -- almost done...