The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vtblazer · 04-13-2008, 10:27 PM

Time to repair my dash, tired of looking at the big ugly hole.

I had installed a junk DIN mount radio/CD player to fill the bigger spot and that was better but I want it fixed now.

Pics show the existing dash, last two are the aluminum option's I have here to work with.
Also have a good factory dash I could cut up and install but it seems like a lot more work and being my off road ride, having a plate that switches could be mounted might be a good thing.

The problem I'm facing is the lowest cut, it's almost to the heater controls and there's a bend in that area that could be tough to duplicate.

Throw up any and all option's, I'm open at this point.

04-13-2008, 10:27 PM	#1
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Hacked Dash Option's? Time to repair my dash, tired of looking at the big ugly hole. I had installed a junk DIN mount radio/CD player to fill the bigger spot and that was better but I want it fixed now. Pics show the existing dash, last two are the aluminum option's I have here to work with. Also have a good factory dash I could cut up and install but it seems like a lot more work and being my off road ride, having a plate that switches could be mounted might be a good thing. The problem I'm facing is the lowest cut, it's almost to the heater controls and there's a bend in that area that could be tough to duplicate. Throw up any and all option's, I'm open at this point. Attached Images Last edited by vtblazer; 04-13-2008 at 10:47 PM.