The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 01-27-2003, 01:39 PM

I have hooked the indicator wire up to a couple of different locations. The grey wire on your heater controls light is one spot or there is a location on your fuse panel. Either location ties you into the dash light circuit, so that your indicator light will dim along with your dash lights when you turn the light switch knob.

The fuse box is the easier because you can plug the lead in if it still has the female terminal on the wire.

Jim

01-27-2003, 01:39 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I have hooked the indicator wire up to a couple of different locations. The grey wire on your heater controls light is one spot or there is a location on your fuse panel. Either location ties you into the dash light circuit, so that your indicator light will dim along with your dash lights when you turn the light switch knob. The fuse box is the easier because you can plug the lead in if it still has the female terminal on the wire. Jim Last edited by JimKshortstep4x4; 01-27-2003 at 01:41 PM.