The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - All kinds of updates, GF's new blazer, my engine and truck.

Kaysenmc · 04-17-2008, 07:09 AM

Since those pics I have added the door trim, and fixed a few little things. All thats left is fix the column (ignition switch is inop, and must start it with a flat screwdriver down towards the brake pedal).

Here's one more of Whit's blazer, it turned out that the slight knock I heard was a rod bearing. As of now the engine is almost ready to be pulled, to be rebuilt. Hopefully it won't cost an arm and a leg, but either way it will be done right.

Also here's one of the Mitsubishi that is getting replaced (thankfully it hadn't sold before her Blazer blew).

04-17-2008, 07:09 AM	#14
Kaysenmc Registered User Join Date: Sep 2007 Location: Marietta, Ok Posts: 246	Re: All kinds of updates, GF's new blazer, my engine and truck. Since those pics I have added the door trim, and fixed a few little things. All thats left is fix the column (ignition switch is inop, and must start it with a flat screwdriver down towards the brake pedal). Here's one more of Whit's blazer, it turned out that the slight knock I heard was a rod bearing. As of now the engine is almost ready to be pulled, to be rebuilt. Hopefully it won't cost an arm and a leg, but either way it will be done right. Also here's one of the Mitsubishi that is getting replaced (thankfully it hadn't sold before her Blazer blew). Attached Images __________________ 87 black silverado swb, tbi 350, 700r4, 3.40 gears. 2.5 drop spindles , 2 inches off stock coils, flip kit out back. cragers with radial ta's... ongoing piddle project! 1970 Olds rallye 350, street strip 403/350 3.73 posi. Looks stock/runnin 12's! 86 K5- SOLD!