The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67-72williso · 04-22-2008, 12:20 AM

Tim, It`s a reman long block 1999. I`m using a DB-2 injector pump and 97-up brackets so I will have to run the thermostat housing that way. that part will still have to be reworked yet. The fire wall may have to reworked not shore yet but the moter is as far front as I could go with it. If it were the truck intake setup there would be no problem with it fitting. I used newer engine and swaybar crossmembers.
Willis

04-22-2008, 12:20 AM	#5
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: 6.5 Diesel Tim, It`s a reman long block 1999. I`m using a DB-2 injector pump and 97-up brackets so I will have to run the thermostat housing that way. that part will still have to be reworked yet. The fire wall may have to reworked not shore yet but the moter is as far front as I could go with it. If it were the truck intake setup there would be no problem with it fitting. I used newer engine and swaybar crossmembers. Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!