|
Re: Windsheild removal
I Just Saved And Reused My Gasket It Was Not Original But Was In Good Shape
Taking Out Be Careful And Dont Force It
Start At Top Middle Work To Outsides Once Corners Are Free Its Cake
Putting Back In Wd40 And Plenty O Patience
Start It On The Bottom Start Working Way Upward Go Back And Keep Applying Downward Pressure As You Work The Sides In It Will Keep Going Farther Down In The Bottom Channel Once Past Upper Corners Its Cake
I Used A Small Flat Piece Of Aluminum With A Tight Bend In The End Of It For The Reinstall
|