The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vern350 · 05-13-2008, 06:28 AM

I posted a tread similar to this in the engine and drivetrain section and still not 100% on what carb I would like. Truck is going to be a weekend warrior. Motor is a 350 with 69 corvette heads with 2.02 valves. Has a 525 lift/248 duration comp cam in it. Compression ratio is 11.5 to 1. Has standard gears in it right now, I'm assuming 3.07 or 3.08s. Eventually will have 3.73/4.10s. Transmission is a turbo 350 with 2800 stall converter. Edelbrock performer intake.

I would think a Edelbrock Performer 1406/600 cfm or Edelbrock Thunder series/AVS 1806/650 cfm carb would be in the correct cfm range. Would like to go with an electric choke. Does this match my setup or is something larger needed?

05-13-2008, 06:28 AM	#1
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Carburetor Selection I posted a tread similar to this in the engine and drivetrain section and still not 100% on what carb I would like. Truck is going to be a weekend warrior. Motor is a 350 with 69 corvette heads with 2.02 valves. Has a 525 lift/248 duration comp cam in it. Compression ratio is 11.5 to 1. Has standard gears in it right now, I'm assuming 3.07 or 3.08s. Eventually will have 3.73/4.10s. Transmission is a turbo 350 with 2800 stall converter. Edelbrock performer intake. I would think a Edelbrock Performer 1406/600 cfm or Edelbrock Thunder series/AVS 1806/650 cfm carb would be in the correct cfm range. Would like to go with an electric choke. Does this match my setup or is something larger needed?