The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Already Gone** · 05-15-2008, 11:44 PM

Thanks for the advice. I also put a message on the 67/72 board and was told it will bolt in but I will check the measurement first. I was also told I will need to do something with the panhard bar cause the Burb rear end doesn't have the stud for the panhard bar to attach. I really didn't want to go this route ( using a used rearend ) but with cost of gas going the way it is ,its either try to get a little better mileage or sell the truck and I RRREEEAAALLLYYY do not want to do that.

05-15-2008, 11:44 PM	#8
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,162	Re: Rear End Question Thanks for the advice. I also put a message on the 67/72 board and was told it will bolt in but I will check the measurement first. I was also told I will need to do something with the panhard bar cause the Burb rear end doesn't have the stud for the panhard bar to attach. I really didn't want to go this route ( using a used rearend ) but with cost of gas going the way it is ,its either try to get a little better mileage or sell the truck and I RRREEEAAALLLYYY do not want to do that. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021