View Single Post
Old 05-16-2008, 04:16 AM   #3
jlaird
Senior Member
 
jlaird's Avatar
 
Join Date: May 2004
Location: johnstown, NY
Posts: 2,393
Re: Frame riviets - easy ways to remove

Here is the best way I have found. take a angle grinder (with grinding disc) and grind an X in the top of the rivit. Then take a chisel and hammer and knock each of the four pieces off. Take your grinder again and grind down the remaining flush with the frame. Then take a punch and hammer and slam that bad boy out. Should take a couple minutes for each rivit after you get the hang of it.
jlaird is offline   Reply With Quote