Quote:
Originally posted by arveetek
I'd change it if I were you. I had one that was loose like yours once. I let it go too long, and then one day it went to pieces. The outer metal loop keeps the driveshaft from flinging all over the place, but you really can't drive it cause it flops up and down and around without the bearing there.
It could leave you stranded.
You shouldn't have any play at all. You should be able to grab the driveshaft, and give it a hard tug and pull. It will give a little bit, due to the rubber it's mounted in, but if it actually moves, it needs to be replaced.
Good luck!
|
Wow, I guess I should be looking at changing mine out too. The last time I checked it, I remember I could move it around pretty good. The bearing seemed OK, but the rubber was all loose. Don't imaging that will be too good for the drive line.
Great - another $50
Oh well, better than upsidedown in the ditch.
