The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Sinister · 05-17-2008, 06:14 AM

I got it from Summit, it's the Summit brand 4 circuit fuse panel, about $12. I unplugged everything from the stock fuse boxes accessory outputs. There's only 2 connectors for the accessories on the stock panel. I took 2 pieces of short wire and put 2 ends into one connector and then 2 connectors on the ends. I did this twice. So you have 2 feeds coming out of the stock fuse panel going into 4 circuits of the new fuse panel. Mounted the new fuse panel right next to the factory one. The new fuse panel takes new ATO (?), style fuses.

05-17-2008, 06:14 AM	#4
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Ignition Hot Terminals??? I got it from Summit, it's the Summit brand 4 circuit fuse panel, about $12. I unplugged everything from the stock fuse boxes accessory outputs. There's only 2 connectors for the accessories on the stock panel. I took 2 pieces of short wire and put 2 ends into one connector and then 2 connectors on the ends. I did this twice. So you have 2 feeds coming out of the stock fuse panel going into 4 circuits of the new fuse panel. Mounted the new fuse panel right next to the factory one. The new fuse panel takes new ATO (?), style fuses. __________________ Beat it to fit, Paint it to match... Last edited by Sinister; 05-17-2008 at 06:14 AM.