The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Additional parts with a disc brake conversion

Tuffy66 · 05-31-2008, 10:03 AM

OK heres a question for those of you that have done the disc brake conversions. I am going with the CPP conversion. I am going with the kit that has the new ball joints, spindles, tie rod ends, and all. everything except the master cylinder. Is there any other parts I should replace while doing the conversion. The other question is the master cylinder can i use one off of a 85 chevy 1/2 pick-up or should I just buy a new one. Any thoughts or opinions.

05-31-2008, 10:03 AM	#1
Tuffy66 Registered User Join Date: Apr 2008 Location: Westhope, ND Posts: 19	Additional parts with a disc brake conversion OK heres a question for those of you that have done the disc brake conversions. I am going with the CPP conversion. I am going with the kit that has the new ball joints, spindles, tie rod ends, and all. everything except the master cylinder. Is there any other parts I should replace while doing the conversion. The other question is the master cylinder can i use one off of a 85 chevy 1/2 pick-up or should I just buy a new one. Any thoughts or opinions.