The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Bonding adhesive for body panels...Anybody use this stuff before?

ChevLoRay · 02-03-2003, 11:32 AM

I had new floor pans and rockers installed at a body shop. Some of it was welded-in and some was installed with their adhesive system. I have had no problems with it at all. The way they use it seals the joint from air infiltration. Welding creates oxidation, so I am feeling pretty good about what I have. Hope this helps.

02-03-2003, 11:32 AM	#2
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	I had new floor pans and rockers installed at a body shop. Some of it was welded-in and some was installed with their adhesive system. I have had no problems with it at all. The way they use it seals the joint from air infiltration. Welding creates oxidation, so I am feeling pretty good about what I have. Hope this helps. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.