The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JACKED86K5 · 06-10-2008, 06:15 PM

just out of curiousity, what would be the issue with using the spacer? As long as its welded and boxed in correctly i cant see an issue with it. Im in the middle of this almost same project, 68 coil spring truck. Not quite swapping out axles yet, but almost there. And yes the frame does widen out over top of the axle on the coil spring setup. I will post any info i find man.

06-10-2008, 06:15 PM	#10
JACKED86K5 Registered User Join Date: May 2008 Location: Gloucester Va Posts: 24	Re: 2wd c/10 to 4wd shackle flip off just out of curiousity, what would be the issue with using the spacer? As long as its welded and boxed in correctly i cant see an issue with it. Im in the middle of this almost same project, 68 coil spring truck. Not quite swapping out axles yet, but almost there. And yes the frame does widen out over top of the axle on the coil spring setup. I will post any info i find man. Last edited by JACKED86K5; 06-10-2008 at 06:16 PM.